Since entering the 21st century, JSW Bonding Film 615/615S adhesive industry has made considerable progress, and the past immature process method can not be compared. However, there is still a defect that the quality can not be directly checked by visual inspection. Two methods must be used for JSW Bonding Film 615/615S inspection, namely destructive inspection and non-destructive inspection. Destructive test can be performed with the same material and adhesive JSW Bonding Film 615/615S bonding process test specimen, process test specimen with the product parts through the process of cleaning, assembly and curing. JSW Bonding Film 615/615S adhesive and adhesive should be assembled at the same time, curing in the same pressure or ambient humidity. The difference is that each part is labeled as an assembly part. After JSW Bonding Film 615/615S is solidified, the label can be removed, and the same test can be conducted as the test specimen. The test results are compared with the technical requirements, so as to determine whether the parts are qualified or not. Decide on the final choice. Remove the parts and then do the system damage, research the actual problem of parts.

JSW recommends that the Bonding test of JSW Bonding Film 615/615S be combined with strict control of the operation process, sampling of bonding parts and destructive test of specimens, so that the quality control level of special JSW Bonding Film 615/615S bonding assembly is related to its structural requirements. The key joints should be inspected by the high standard sampling and strict acceptance requirements in the failure test, while the general JSW Bonding Film 615/615S bonding part inspection method is not so strict. The first step of quality control is to control the quality of JSW Bonding Film 615/615S adhesive and quilt adhesive formed by the joint, and conduct necessary inspection and test to ensure that the acceptance requirements are met. JSW Company conducts sample Bonding of each batch of JSW Bonding Film 615/615S adhesive before leaving the factory, and conducts destructive test to ensure sufficient bonding strength after proper curing. And carefully control the storage conditions, so that customers used JSW Bonding Film 615/615S are qualified inspection.

Dongguan Jia Shengwei Technology Co., Ltd.

jsw Bonding Film 615/615S ，Our philosophy is based on understanding the needs of our clients and providing them with the solutions that are right for them. We strive for continuous improvement in order to provide the best quality products and outstanding customer service.jsw Bonding Film 615/615S ， We look forward to receiving all our customers'feedback and requests: from sourcing the right materials that meet your need to providing special solutions for your special cases. Our company  aims to be your favorite and trustworthy business partner.jsw Bonding Film 615/615S ， We are committed to providing customers with better products and after-sales service guarantee, thank you for your trust and support to our products.

JSW Bonding Film 615/615S  is easy to use and has low melting point. It can be used at 110 ℃. The JSW Bonding Film 615/615S  is widely used in the solution of narrow frame bonding of mobile phones and tablet computers. It has good weather resistance: because of the irreversible characteristics after bridge erection, it will not creep and brittle due to the change of ambient temperature. Modified solid JSW Bonding Film 615/615S  is a kind of cross-linked structural adhesive with high adhesive strength. It has good fluidity when heated and is easy to coat It has the characteristics of fast melting by heating and fast cooling (about 4S) to achieve high strength adhesive force. JSW Bonding Film 615/615S can meet the bonding requirements of structural parts of mobile electronic products. The adhesive strength of JSW Bonding Film 615/615S is 40% - 60% higher than other adhesives under the same conditions, reducing the use of adhesives.

The above is a brief introduction of JSW Bonding Film 615/615S . For detailed data, please 

go to the download window of jinshengwei official website. The following is the informal information of JSW Bonding Film 615/615S  for reference only.

The production technology and dispensing technology ofJSW Bonding Film 615/615S   have also made great progress. The application of new production technologies such as narrow frame bracket, digital window and wide screen plays an important role in improving the performance ofJSW Bonding Film 615/615S  and improving the product grade and quality. The capacity of JSW615 hot melt rubber polymerizer has been expanded from several cubic meters to more than ten cubic meters to 28-32 cubic meters. Semi continuous or continuous production has been adopted to realize computer control. TheJSW Bonding Film 615/615S  dispensing machine and humidifier designed and manufactured by ourselves have reached the world-class level with dispensing speed up to 250m / min. In addition,JSW Bonding Film 615/615S electrostatic elimination technology automatic control device, high sensitivity sensor, frequency control system and other automatic control technologies have been developed and put into production.

 Bonding Film 615/615S  manufacturing resources (materials, energy, equipment, tools, capital, technology, information and human resources, etc.) are transformed into industries that can be used and utilized by people and JSW Bonding Film 615/615S    industrial products and consumer products through manufacturing process according to market requirements. JSW Bonding Film 615/615S manufacturing industry directly reflects the adhesive productivity level of a country, which is an important factor to distinguish developing countries from developed countries.JSW Bonding Film 615/615S  manufacturing industry occupies an important share in the national economy of developed countries in the world.

According to the material forms used in production, JSW Bonding Film 615/615S  manufacturing industry can be divided into discrete manufacturing industry and process manufacturing industry.