龍人從事芯片解密多年，對每一款芯片的特性了如指掌。依靠成熟的現成解密方案，權威的解密技術以及豐富的實際解密經驗，龍人將為您提供安全可靠、價格合理的優質解密服務。

以下是對DS87C520芯片的簡單介紹，可作為參考依據

The DS87C520/DS83C520 EPROM/ROM high-speed microcontrollers are fast 8051-compatible microcontrollers. They feature a redesigned processor core without wasted clock and memory cycles. As a result, the devices execute every 8051 instruction between 1.5 and 3 times faster than the original for the same crystal speed. Typical applications will see a speed improvement of 2.5 times using the same code and the same crystal. The DS87C520/DS83C520 offer a maximum crystal speed of 33MHz, resulting in apparent execution speeds of 82.5MHz (approximately 2.5X).

The DS87C520/DS83C520 are pin compatible with all three packages of the standard 8051, and include standard resources such as three timer/counters, serial port, and four 8-bit I/O ports. They feature 16kB of EPROM or mask ROM with an extra 1kB of data RAM. Both OTP and windowed packages are available.

Besides greater speed, the microcontroller includes a second full hardware serial port, seven additional interrupts, programmable Watchdog Timer, Brownout Monitor, and Power-Fail Reset. The device also provides dual data pointers (DPTRs) to speed block data memory moves. It also can adjust the speed of MOVX data memory access from two to nine machine cycles for flexibility in selecting external memory and peripherals.

A new Power Management Mode (PMM) is useful for portable applications. This feature allows software to select a lower speed clock as the main time base. While normal operation has a machine cycle rate of 4 clocks per cycle, the PMM runs the processor at 64 or 1024 clocks per cycle. For example, at 12MHz, standard operation has a machine cycle rate of 3MHz. In Power Management Mode, software can select either 187.5kHz or 11.7kHz machine cycle rate. There is a corresponding reduction in power consumption when the processor runs slower.

The EMI reduction feature allows software to select a reduced emission mode. This disables the ALE signal when it is unneeded.

The DS83C520 is a factory mask ROM version of the DS87C520 designed for high-volume, costsensitive applications. It is identical in all respects to the DS87C520, except that the 16kB of EPROM is replaced by a user-supplied application program. All references to features of the DS87C520 will apply to the DS83C520, with the exception of EPROM-specific features where noted. Please contact your local Dallas Semiconductor sales representative for ordering information.

DS87C520  FEATURES

80C52 Compatible

8051 Pin- and Instruction-Set Compatible

Four 8-Bit I/O Ports

Three 16-Bit Timer/Counters

256 Bytes Scratchpad RAM

Large On-Chip Memory

16kB Program Memory

1kB Extra On-Chip SRAM for MOVX

ROMSIZE Feature

Selects Internal ROM Size from 0 to 16kB

Allows Access to Entire External Memory Map

Dynamically Adjustable by Software

Useful as Boot Block for External Flash

High-Speed Architecture

4 Clocks/Machine Cycle (8051 = 12)

Runs DC to 33MHz Clock Rates

Single-Cycle Instruction in 121ns

Dual Data Pointer

Optional Variable Length MOVX to Access

Fast/Slow RAM/Peripherals

Power Management Mode

Programmable Clock Source to Save Power

CPU Runs from (crystal/64) or (crystal/1024)

Provides Automatic Hardware and Software Exit

EMI Reduction Mode Disables ALE

Two Full-Duplex Hardware Serial Ports

High Integration Controller Includes:

Power-Fail Reset

Early-Warning Power-Fail Interrupt

Programmable Watchdog Timer

13 Interrupt Sources with Six External

Available in 40-pin PDIP, 44-Pin PLCC, 44-Pin TQFP, and 40-Pin Windowed CERDIP

Factory Mask DS83C520 or EPROM (OTP) DS87C520

有芯片解密、IC解密、單片機解密需求者歡迎與龍人聯系咨詢更多解密詳情http://www.pcbmy.com/xinpianjiemi/IC/